PDF (8106K)
摘要
采用等体积浸渍法制备了一系列Mn1Co2.3复合物负载不同质量分数Ag颗粒的催化剂,并用于碳烟颗粒的催化燃烧。结果表明,制得的Ag(10)-Mn1Co2.3在松散接触模式以及10% O2/Ar+10% H2O(g)+500 μL/L NO<i>x辅助气氛条件下表现出最佳的催化活性,其T10、T50和T90分别为293、338℃和375℃。负载Ag不仅提高了催化剂的本征活性,而且Mn1Co2.3所具有的多孔纳米片形貌使该催化剂与反应物之间具有良好的固-固接触效率。
Abstract
A series of catalysts with different amounts of Ag loaded on Mn1Co2.3 are prepared via the equal volume incipient wetness impregnation method,and applied in the catalytic combustion of soot particles.The test results show that the prepared Ag(10)-Mn1Co2.3 exhibits the best catalytic activity under loose contact mode with 10% O2/Ar+10% H2O(g)+500 μL·L-1 NOx auxiliary atmosphere,and its T10,T50 and T90 are 293℃,338℃ and 375℃,respectively.The good performance might be due to that the loaded Ag improves the intrinsic activity of the catalysts,while the porous nanosheet morphology of Mn1Co2.3 allows a good contact efficiency between the catalyst and soot.
关键词
催化燃烧
/
Ag负载
/
多孔纳米片
/
碳烟颗粒
Key words
catalytic combustion
/
Ag loading
/
porous nanosheets
/
soot particles
Author summay
胡苗苗(1998-),女,硕士生,研究方向为柴油机尾气污染控制,humiaomiao1016@163.com。
用于碳烟燃烧的Ag(x)-Mn1Co2.3多孔纳米片催化剂的制备与性能研究[J].
现代化工, 2024, 44(1): 133-139 DOI:10.16606/j.cnki.issn0253-4320.2024.01.025