PDF (2930K)
摘要
对某厂低压含烃特殊原料气进行低温甲醇洗工艺设计,该原料气属于低压进料,且含有苯等有机烃类。针对原料气具体特点,设计了2套低温甲醇洗工艺,工艺Ⅰ是采用传统11塔低温甲醇洗方案,工艺Ⅱ采用9塔低温甲醇洗方案。借助Aspen Plus模拟分析表明,2套工艺均能达到净化要求,工艺Ⅱ较工艺Ⅰ有较好的节能及净化效果。对以后低压含烃特殊原料气的净化提供了参考。
Abstract
Rectisol processes are designed for special low-pressure feed gas containing hydrocarbon components,such as benzene and other organic hydrocarbons,for a factory.Given the specific characteristics of feed gas,two sets of Rectisol processes are designed as process Ⅰ and process Ⅱ.Process Ⅰ adopts traditional Rectisol flowsheet with 11 towers.Process Ⅱ adopts Rectisol flowsheet with 9 towers employed.According to the simulation analysis by Aspen plus,both processes can meet the purification requirements.Process Ⅱ shows better energy saving and purification effect than process Ⅰ.This work provides a reference for the purification of low-pressure special feed gas containing hydrocarbon components.
关键词
低温甲醇洗
/
模拟分析
/
Aspen Plus
/
工艺设计
/
低压进料
Key words
Rectisol
/
simulation analysis
/
Aspen Plus
/
process design
/
low-pressure feed gas
Author summay
低压含烃原料气低温甲醇洗工艺的设计[J].
现代化工, 2020, 40(11): 200-206 DOI:10.16606/j.cnki.issn0253-4320.2020.11.042