以MCM-41为载体、硝酸镍为镍源、硝酸钴为钴源、磷酸氢二铵为磷源制备了Ni改性的磷化钴催化剂，并利用XRD、BET、SEM、CO吸附等分析手段对催化剂进行表征。以苯并呋喃（BF）为模型化合物，在连续流动固定床反应器中研究了不同镍磷比对催化剂加氢脱氧性能的影响。结果表明，引入Ni能显著加速加氢脱氧反应的进行，并且能提高主反应的选择性。在300℃、3.0 MPa、质量空速4.0 h^-1、H₂/油体积比为500的条件下，CoP/MCM-41催化剂BF转化率为60%，无氧产率为19%；而NiCoP/MCM-41催化剂BF转化率为98%，无氧产率为88%，催化剂BF转化率提高了28%，无氧产率提高了69%。

Nickel modified cobalt phosphide catalyst is prepared via impregnation method through using McM-41 as carrier,nickel nitrate as nickel source,cobalt nitrate as cobalt source and diammonium hydrogen phosphate as phosphorus source.The obtained catalyst samples are characterized by XRD,BET,SEM,FT-IR and CO-uptake.Taking benzofuran (BF) as model compound,the influences of Ni/P ratio on the hydrodeoxygenation performance of the catalyst are studied in a continuous flow fixed bed reactor.It is shown that the addition of Ni can accelerate hydrodeoxygenation reaction and enhance the selectivity of main reaction.Under the conditions that temperature is at 300℃,pressure is 3 MPa,H₂/oil ratio is 500 (v/v),and the weight hourly space velocity (WHSV) is 4 h^-1,the conversion rate of BF and the anaerobic yield over CoP/MCM-41 catalyst reach 60% and 19% respectively,while the conversion rate of BF and the anaerobic yield over NiCoP/MCM-41 catalyst reach 98% and 88% respectively,representing increases of 28% and 69%,respectively.

秦浩(1994-),男,硕士研究生,研究方向为工业催化,386060167@qq.com