Research progress on IPMC as flexible actuating material
TIAN Ai-fen1, SUN Yue1, WANG Xi-xi1, LI Jia-hua1, ZHANG Xin-rong2, WANG Hong-yan3
1. College of Materials Science and Engineering, Xi'an University of Science and Technology, Xi'an 710054, China; 2. Shaanxi Provincial Key Laboratory of Expressway Construction Machinery, MOE, School of Construction Machinery, Chang'an University, Xi'an 710054, China; 3. Shaanxi Kekong Technology Industry Research Institute, Shaanxi Science and Technology Holding Group, Xi'an 710077, China
Abstract: Research progress on IPMC as flexible actuating material is introduced in detail.The research background and actuating mechanism of IPMC are described.Different preparation methods for IPMC are analyzed and compared.The methods to improve the performance of IPMC are classified,described and summarized.Finally,the application of IPMC is comprehensively summarized,and the research trend on IPMC is prospected.
田爱芬, 孙悦, 王茜茜, 李佳华, 张新荣, 王洪彦. IPMC柔性驱动材料研究进展[J]. 现代化工, 2022, 42(4): 48-52.
TIAN Ai-fen, SUN Yue, WANG Xi-xi, LI Jia-hua, ZHANG Xin-rong, WANG Hong-yan. Research progress on IPMC as flexible actuating material. Modern Chemical Industry, 2022, 42(4): 48-52.
[1] Parreira R,Özelçi E,Sakar M S.Remotely controlled colloidal assembly of soft microrobotic artificial muscle[J].Advanced Intelligent Systems,2020,2(7):2000062. [2] Arshad M,Du H L,Javed M S,et al.Fabrication,structure,and frequency-dependent electrical and dielectric properties of Sr-doped BaTiO3 ceramics[J].Ceramics International,2020,46(2):2238-2246. [3] Wen S,Liu Y,Zhou Y,et al.Effect of Ni content on the transformation behavior and mechanical property of NiTi shape memory alloys fabricated by laser powder bed fusion[J].Optics & Laser Technology,2021,134:106653. [4] Hamlen R P,Kent C E,Shafer S N.Electrolytically activated contractile polymer[J].Nature,1965,206(4989):1149-1150. [5] Oguro K,Kawami Y,Takenaka H.Morphology of electrodes and bending response of the polymer electrolyte actuator.Bending of an ion-conducting polymer film-electrode composite by an electric stimulus at low voltage[J].Micromachine Society,1992,5:27-30. [6] Shahinpoor M,Bar-Cohen Y,Xue T,et al.Some experimental results on ionic polymer-metal composites (IPMC) as biomimetic sensors and actuators:Proceedings of SPIE-the international society for optical engineering[C].San Diego,California:1998:251-267. [7] Kim S,Kim K J.Palladium buffer-layered high performance ionic polymer-metal composites[J].Smart Materials & Structures,2008,17(3):35011. [8] Bahramzadeh Y,Shahinpoor M.A review of ionic polymeric soft actuators and sensors[J].Soft Robotics,2014,1(1):38-52. [9] 霍凯,何青松,尹国校,等.方柱状IPMC制备与驱动性能的研究[J].功能材料,2019,50(9):9013-9018. [10] Guo D J,Long W,Wang X J,et al.PEDOT coating enhanced electromechanical performances and prolonged stable working time of IPMC actuator[J].Sensors and Actuators B:Chemical,2020,305:127488. [11] Zu L,Li Y,Lian H,et al.The enhancement effect of mesoporous graphene on actuation of nafion-based IPMC[J].Macromolecular Materials and Engineering,2016,9:1076-1083. [12] Nemat-Nasser S.Micromechanics of actuation of ionic polymer-metal composites[J].Journal of Applied Physics,2002,92:2899-2914. [13] Bonomo C,Fortuna L,Giannone P,et al.A method to characterize the deformation of an IPMC sensing membrane[J].Sensors and Actuators A:Physical,2005,123:146-154. [14] Wang Y J,Zhu Z C,Chen H L,et al.Effects of preparation steps on the physical parameters and electromechanical properties of IPMC actuators[J].Smart Materials & Structures,2014,23:125015. [15] Jung S Y,Park J,Park S.Replacement of surface roughening using polyvinyl alcohol coating in the fabrication of nafion-based ionic polymer metal composite (IPMC) actuators[J].Journal of Polymer Research,2016,23(9):1-6. [16] 杜野,赵刚,隋志阳,等.电泳沉积法在IPMC电极制备中的应用研究[J].哈尔滨工业大学学报,2020,52(1):100-106. [17] Jung S Y,Ko S Y,Park J,et al.Enhanced ionic polymer metal composite actuator with porous nafion membrane using zinc oxide particulate leaching method[J].Smart Materials & Structures,2015,24(3):03700. [18] Wang H S,Cho J,Song D S,et al.High-performance electroactive polymer actuators based on ultrathick ionic polymer-metal composites with nanodispersed metal electrodes[J].ACS Applied Materials and Interfaces,2017,9:21998-22005. [19] Xue Z G,Tang Y J,Duan X L,et al.Ionic polymer-metal composite actuators obtained from sulfonated poly (ether ether sulfone) ion-exchange membranes[J].Composites Part A:Applied Science and Manufacturing,2016,81:13-21. [20] Luqman M,Jang-Woo L,Kwang-Kil M,et al.Sulfonated polystyrene-based ionic polymer-metal composite (IPMC) actuator[J].Journal of Industrial and Engineering Chemistry,2010,17(1):49-55. [21] Peng W,Zhang Y,Gao J,et al.Fabrication and performance of ionic polymer-metal composites for biomimetic applications[J].Sensors and Actuators A:Physical,2019,299:111613. [22] 罗斌,朱子才,陈花玲,等.离子液体型离子聚合物金属复合材料的封装及变形性能[J].西安交通大学学报,2017,51(8):122-127. [23] 张小青,于敏,何青松,等.离子液体对IPMC性能的影响[J].化学工程师,2012,26(1):1-5. [24] 唐刚强,王延杰,张磊,等.离子聚合物材料驱动的仿墨鱼喷射结构设计与研究[J].功能材料与器件学报,2020,26(3):219-225. [25] Zhao Y,Xu D,Sheng J,et al.Biomimetic beetle-inspired flapping air vehicle actuated by ionic polymer-metal composite actuator[J].Applied Bionics and Biomechanics,2018,2018:3091579. [26] Ma S,Zhang Y,Liang Y H,et al.High-performance ionic-polymer-metal composite:Toward large-deformation fast-response artificial muscles[J].Advanced Functional Materials,2020,30(7):1908508. [27] Leary S,Yavrouian A,Oguro K,et al.Challenges to the application of IPMC as actuators of planetary mechanisms:Proceedings of the SPIE-the international society for optical engineering[C].California:San Diego,2000:140-146. [28] 尹国校,岳英豪,于敏,等.基于IPMC材料的柔性抓捕机构设计[J].载人航天,2019,25(2):213-217. [29] Wang J,Mcdaid A J,Lu C Z,et al.A compact ionic polymer-metal composite (IPMC) actuated valveless pump for drug delivery[J].IEEE/ASME Transactions on Mechatronic,2017,22(1):196-205. [30] Li H K,Fan M,Yue Y H,et al.Motion control of capsule-like underwater robot utilizing the swing properties of ionic polymer metal composite actuators[J].Journal of Bionic Engineering,2020,17(2):281-289.