Please wait a minute...
 
最新公告: 重要提醒:骗子冒充编辑部要求加作者微信,谨防上当!   关于暑假、寒假期间版面费发票及期刊样刊延迟邮寄的通知    
现代化工  2021, Vol. 41 Issue (5): 186-190    DOI: 10.16606/j.cnki.issn0253-4320.2021.05.038
  科研与开发 本期目录 | 过刊浏览 | 高级检索 |
相反转法制备丙烯酸改性醇酸树脂乳液的研究
马珂珂, 程相林, 赵建宏, 王建设, 孙世昌, 周鹏举, 李蒙, 王晨
郑州大学化工学院, 河南 郑州 450001
Preparation of acrylic modified alkyd resin emulsion by phase inversion method
MA Ke-ke, CHENG Xiang-lin, ZHAO Jian-hong, WANG Jian-she, SUN Shi-chang, ZHOU Peng-jv, LI Meng, WANG Chen
School of Chemical Engineering, Zhengzhou University, Zhengzhou 450001, China
下载:  PDF (5034KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 为提高醇酸树脂性能,制备了干燥速率快、硬度高、低VOCs的乳液,采用相反转法制备丙烯酸改性醇酸树脂乳液,探究了乳化温度、碱加量、剪切速率等工艺条件对乳液稳定性及漆膜性能的影响。结果表明,在N,N-二甲基甲酰胺质量为5.3 g/(400 g树脂)、乳化剂质量分数为6%、乳化温度为85℃、剪切速率为5 000~7 000 r/min时,制备的丙烯酸改性醇酸树脂乳液稳定性好,漆膜的干燥、耐水等性能均得到较大提高。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
马珂珂
程相林
赵建宏
王建设
孙世昌
周鹏举
李蒙
王晨
关键词:  相反转法  丙烯酸改性醇酸树脂  乳液  稳定性  漆膜性能    
Abstract: In order to improve the performance of alkyd resin,the emulsion that can dry fast,has a high hardness and contains low VOCs is prepared,and used to make acrylic modified alkyd resin by phase inversion method.The influences of process conditions such as emulsification temperature,alkali dosage and shear rate on the stability and coating film performance of the emulsion are studied.It is shown that the prepared acrylic modified alkyd resin emulsion has a good stability,and can form the coating film with better drying and water resistance performance when the adding amount of N—N dimethylformamide is 5.3 g per 400 g of resin,the mass fraction of emulsifier is 6%,emulsifying temperature is at 85℃ and shear rate is in the range of 5 000-7 000 rpm.
Key words:  phase inversion    acrylic modified alkyd resin    emulsion    stability    characteristics of coating film
收稿日期:  2020-06-03      修回日期:  2021-03-05           出版日期:  2021-05-20
ZTFLH:  TQ630.4  
通讯作者:  程相林(1975-),男,博士,讲师,研究方向为水性涂料,通讯联系人,cxl8817@163.com。    E-mail:  cxl8817@163.com
作者简介:  马珂珂(1994-),女,硕士研究生,研究方向为水性涂料,kekema1994@163.com
引用本文:    
马珂珂, 程相林, 赵建宏, 王建设, 孙世昌, 周鹏举, 李蒙, 王晨. 相反转法制备丙烯酸改性醇酸树脂乳液的研究[J]. 现代化工, 2021, 41(5): 186-190.
MA Ke-ke, CHENG Xiang-lin, ZHAO Jian-hong, WANG Jian-she, SUN Shi-chang, ZHOU Peng-jv, LI Meng, WANG Chen. Preparation of acrylic modified alkyd resin emulsion by phase inversion method. Modern Chemical Industry, 2021, 41(5): 186-190.
链接本文:  
https://www.xdhg.com.cn/CN/10.16606/j.cnki.issn0253-4320.2021.05.038  或          https://www.xdhg.com.cn/CN/Y2021/V41/I5/186
[1] 朱琴,易昌凤,徐祖顺,等.水性醇酸树脂的合成及改性研究进展[J].中国涂料,2015,30:11-16.
[2] 强志华,程相林,赵建宏,等.相反转法制备醇酸树脂乳液[J].涂料工业,2019,49(5):22-27.
[3] 金永香,连海兰.环氧树脂的相反转乳化技术研究进展[J].涂料工业2018,48(9):70-76.
[4] 周子鹄,涂伟萍,杨卓如,等.丙烯酸改性醇酸树脂的研制[J].化学工程师,2000,1:5-7.
[5] 刘国杰.醇酸树脂涂料[M].北京:化学工业出版社,2015:600-601.
[6] 朱洪洲,田春玲,何丽红,等.非离子型水性环氧树脂乳液的研制及性能研究[J].化工新型材料,2016,(11):226-228.
[7] 陈强.水性环氧乳液与水性固化剂的制备研究[D].天津:天津大学,2007.
[8] Yang Z Z,Xu Y Z,Zhao D L,et al.Preparation of waterborne dispersions of epoxy resin by the phase-inversion emulsification technique.2.Theoretical consideration of the phase-inversion process[J].Colloid & Polymer Science,2000,278(11):1103-1108.
[9] 王进,杜宗良,李瑞霞,等.环氧树脂水基分散体系的相反转乳化[J].功能高分子学报,2000,13(2):141-144.
[10] Isabel M,Noelia Z,Eric T,et al.Emulsion catastrophic inversion from abnormal to normal morphology.2.effect of the stirring intensity on the dynamic inversion frontier[J].Ind Eng Chem Res,2003,42:57-61.
[11] Perazzo A,Preziosi V,Guido S.Phase inversion emulsification:Current understanding and applications[J].Advances in Colloid and Interface Science,2015,222:581-599.
[12] Noelia Z,Eric T,Isabel M,et al.Emulsion catastrophic inversion from abnormal to normal morphology.1.effect of the water-to-oil ratio rate of change on the dynamic inversion frontier[J].Industrial & Engineering Chemistry Research,2003,42:50-56.
[13] 杨振忠,赵得禄,许元泽,等.环氧树脂相反转乳化过程相态发展研究[J].高等学校化学学报,1999,5:809-813.
[14] Strey R.Phase behavior and interfacial curvature in water-oil-surfactant systems[J].Current Opinion in Colloid & Interface Science,1996,1:402-41.
[15] Eric T,Isabel M,Noelia Z,et al.Emulsion catastrophic inversion from abnormal to normal morphology.3.conditions for triggering the dynamic inversion and application to industrial processes[J].Industrial & Engineering Chemistry Research,2003,42:4311-4318.
[16] 程文,王宇,鲁锦伟.相反转工艺对环氧乳液稳定性的影响[J].电镀与涂饰,2017,36(18):976-980.
[17] 周立新,叶楚平,杨卓如.影响环氧树脂E-44相反转乳化的因素[J].应用化学,2009,26(8):939-943.
[1] 南变娣, 靳长清, 张弛, 肖泽民, 张怡静. 氧化镍基锂离子电池负极材料研究进展[J]. 现代化工, 2021, 41(5): 20-23,29.
[2] 戴豪波, 杜凯敏, 郑渭建, 刘春红, 胡晨晖, 卓佐西, 蒋楠. NH3-SCR脱硝催化剂研究进展[J]. 现代化工, 2021, 41(5): 40-44,48.
[3] 那平, 李萌, 高凯花, 王榕静, 潘玉福. 微乳液-水热法制备纳米氢氧化钙及其对亚甲基蓝去除的研究[J]. 现代化工, 2021, 41(5): 88-92.
[4] 吴芹, 石泉, 宋淑芬, 黎汉生, 史大昕, 赵芸, 矫庆泽. 磺酸树脂催化合成对叔丁基苯甲酸甲酯的研究[J]. 现代化工, 2021, 41(5): 98-102.
[5] 安英杰, 王若琳, 李田田, 徐玉枫, 牛春梅. 高取代度辛烯基琥珀酸环糊精酯的制备及其性能研究[J]. 现代化工, 2021, 41(5): 158-162.
[6] 刘金成, 王斯晗, 陈谦, 徐显明. 乙烯-丙烯酸甲酯共聚物(EMA)的研究进展[J]. 现代化工, 2021, 41(3): 79-82.
[7] 郭炜, 王亚明, 蒋丽红, 郑燕娥, 刘壁莹. La3+/CNMS-SO3H固体酸的制备及其催化合成正龙脑的研究[J]. 现代化工, 2021, 41(2): 107-113,119.
[8] 胡月, 李凤艳, 蔚红建, 赵天波. 氟硅共聚改性提高聚丙烯酸酯力学和疏水性能的研究[J]. 现代化工, 2021, 41(2): 120-123,129.
[9] 毛倩, 于玉夺, 李敏, 葛文书, 贺高红, 张文君. 二(2-乙基己基)磷酸酯协同二苯并-18-冠醚-6高效分离浓盐水中钙镁离子乳化液膜的研究[J]. 现代化工, 2021, 41(2): 135-139,145.
[10] 闵洁, 何丽华, 郑荣, 苏红莹, 支云飞, 陕绍云. 核/壳结构磁性Fe3O4@SiO2纳米粒子的制备及表征[J]. 现代化工, 2021, 41(2): 146-150.
[11] 王刚, 邱俊彬, 朱佳平, 谭华, 侯兆凯. 两亲性SiO2/APTES/PFOA纳米颗粒的制备及其界面性能研究[J]. 现代化工, 2020, 40(S1): 88-91.
[12] 孙欣欣. 助剂W改性α-氧化铝载体对乙烯环氧化银催化剂性能的影响[J]. 现代化工, 2020, 40(7): 175-179.
[13] 刘杰梅, 王宁, 宋亚伟, 杨亚帅, 杨宾. 赤藻糖醇基相变材料热性能的实验研究[J]. 现代化工, 2020, 40(6): 66-71.
[14] 常小虎, 赵毅, 郝芸, 徐梦瑶, 姚丽蓉. 纳米流体在原油加热系统中的定量实验研究[J]. 现代化工, 2020, 40(6): 160-164.
[15] 高健强, 贺拥军, 芦建华. CdS/SiO2复合粒子的制备及稳定Pickering乳液的性能研究[J]. 现代化工, 2020, 40(5): 170-175.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-37
版权所有 © 《现代化工》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn