Please wait a minute...
 
最新公告: 重要提醒:骗子冒充编辑部要求加作者微信,谨防上当!   关于暑假、寒假期间版面费发票及期刊样刊延迟邮寄的通知    
现代化工  2020, Vol. 40 Issue (6): 208-211,217    DOI: 10.16606/j.cnki.issn0253-4320.2020.06.043
  工业技术 本期目录 | 过刊浏览 | 高级检索 |
非均质油藏水平井调剖注入压力和注入量预测方法的建立与应用
陈维余, 刘凤霞, 黄波, 易飞, 孟科全, 朱立国
中海油能源发展股份有限公司工程技术分公司, 天津 300452
Establish and application of prediction method of injection pressure and injection volume for profile control in horizontal wells of heterogeneous oil reservoirs
CHEN Wei-yu, LIU Feng-xia, HUANG Bo, YI Fei, MENG Ke-quan, ZHU Li-guo
Engineering Technology Branch, CNOOC Energy Technology & Services Ltd., Tianjin 300452, China
下载:  PDF (1508KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 针对注入凝胶前后水平井注入参数的沿程分布问题,运用叠加原理与镜像反应原理,并考虑井筒摩阻的影响,建立了预测调剖前后注入压力与注水量沿程分布的解析方法,分析了凝胶对注入参数的影响。用此方法模拟预测了均质条件下和非均质条件下水平井注凝胶调剖前后注水量与注入压力的分布规律,为优化水平井调剖工艺参数、提高措施效果提供了保障。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
陈维余
刘凤霞
黄波
易飞
孟科全
朱立国
关键词:  非均质储层  水平井调剖  注入压力  注水量    
Abstract: Aiming at the distribution along path problem of horizontal well injection parameters before and after gel injection profile control,an analytical method for predicting the distribution along path of injection pressure and water injection amount is established through applying the superposition principle and mirror reflection principle,and considering the influence of shaft friction.The effect of gel on the injection parameters is analyzed.This method is used to predict the distribution rule of water injection volume and injection pressure before and after gel injection profile control under homogeneous and heterogeneous conditions,which provides a guarantee for optimizing the profile control process parameters of horizontal wells and improving the effect of measures.
Key words:  heterogeneous reservoirs    profile control on horizontal well    injection pressure    water injection volume
收稿日期:  2020-02-25      修回日期:  2020-04-07          
ZTFLH:  TE349  
基金资助: 中海油总公司综合科研项目(CNOOC-KJ,135KJXM,NFGJ2019-05)
通讯作者:  陈维余(1981-),男,学士,高级工程师,从事海上油田增产措施技术研究与应用,通讯联系人,chenwy@cnooc.com.cn。    E-mail:  chenwy@cnooc.com.cn
引用本文:    
陈维余, 刘凤霞, 黄波, 易飞, 孟科全, 朱立国. 非均质油藏水平井调剖注入压力和注入量预测方法的建立与应用[J]. 现代化工, 2020, 40(6): 208-211,217.
CHEN Wei-yu, LIU Feng-xia, HUANG Bo, YI Fei, MENG Ke-quan, ZHU Li-guo. Establish and application of prediction method of injection pressure and injection volume for profile control in horizontal wells of heterogeneous oil reservoirs. Modern Chemical Industry, 2020, 40(6): 208-211,217.
链接本文:  
https://www.xdhg.com.cn/CN/10.16606/j.cnki.issn0253-4320.2020.06.043  或          https://www.xdhg.com.cn/CN/Y2020/V40/I6/208
[1] 李华斌,赵化廷,赵普春,等.中原高温高盐油藏疏水缔合聚合物凝胶调剖剂研究[J].油田化学,2006,23(1):50-53.
[2] 张兵,蒲春生,于浩然,等.裂缝性油藏多段塞凝胶调剖技术研究及应用[J].油田化学,2016,(1):46-50.
[3] 刘想平.底水驱油藏水平井三维稳态解产能公式[J].石油天然气学报,1998,(1):54-58.
[4] 黄学军,崔桂香,周海兵.水平井变质量管内流动损失的数值研究(二):多支管流动[J].石油钻采工艺,2000,22(3):50-53.
[5] 刘想平,蒋志祥,江如意,等.水平井筒内压降对水平井向井流动态关系的影响[J].石油钻采工艺,2000,22(1):42-45.
[6] 张雷.关于水平井注水管柱的受力分析[J].中国新技术新产品,2012,19(1):144.
[7] 谢昆,俞理,董汉平,等.无限导流水平井动态压力分布研究[J].科学技术与工程,2012,12(31):8201-8204.
[8] 刘承杰.复杂流体边界油藏注水井井底压力响应特征研究[J].钻采工艺,2011,34(1):36-38.
[9] 裴承河,陈守民,陈军斌.分层注水技术在长6油藏开发中的应用[J].西安石油大学学报:自然科学版,2006,21(2):33-36.
[10] 朱平.复合交联聚合物凝胶调剖体系在杨家坝油田杨10-3井组的应用[J].油气地质与采收率,2007,14(5):95-97.
[11] 曹伟佳,卢祥国,闫冬,等.海上油田深部调剖组合方式实验优选[J].中国海上油气,2018,30(5):107-112.
[12] 郑俊德,魏兆胜,陈家琅,等.水平井有杆泵抽油井井筒压力分布预测方法[J].油气田地面工程,1995,14(5):6-7.
[13] 刘慈群,杨玠.水平井瞬时压力动态分析[J].石油学报,1991,20(3):76-82.
[14] 李保柱,宋文杰,纪淑红,等.水平井水平段压力分布研究[J].石油学报,2003,24(3):97-100.
[15] 陈洪,张三辉,储玉宝,等.高温高盐油藏用疏水缔合聚合物凝胶调剖剂研制与应用[J].油田化学,2004,21(4):343-346.
No related articles found!
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-37
版权所有 © 《现代化工》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn