Please wait a minute...
 
最新公告: 重要提醒:骗子冒充编辑部要求加作者微信,谨防上当!   关于暑假、寒假期间版面费发票及期刊样刊延迟邮寄的通知    
现代化工  2020, Vol. 40 Issue (1): 194-197    DOI: 10.16606/j.cnki.issn0253-4320.2020.01.041
  工业技术 本期目录 | 过刊浏览 | 高级检索 |
双-(全氟异丙基)-酮间歇精馏过程的模拟与应用
王世尧, 王敏, 高占阳, 于萍, 罗运柏
武汉大学化学与分子科学学院, 有机硅化合物及材料教育部工程研究中心, 湖北 武汉 430072
Simulation and application of batch distillation process for bis-(perfluoroisopropyl)-ketone
WANG Shi-yao, WANG Min, GAO Zhan-yang, YU Ping, LUO Yun-bai
Organosilicon Compounds & Materials Engineering Research Center of the Ministry of Education, College of Chemistry and Molecular Sciences, Wuhan University, Wuhan 430072, China
下载:  PDF (1418KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 为了得到质量分数大于97%的C7F14O,采用化工软件Aspen Plus中的WILS-HF模型进行模拟,理论塔板数为50,去除杂质时回流比为3,收集C7F14O产品时回流比为10,模拟得到的C7F14O收率为46.13%。试验结果得到的C7F14O收率为44.46%,与模拟结果一致,为工业放大提供了参考。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王世尧
王敏
高占阳
于萍
罗运柏
关键词:  七氟异丁腈  双-(全氟异丙基)-酮  间歇精馏  Aspen Plus  模拟    
Abstract: In order to obtain C7F14O with mass fraction more than 97%,the simulation is carried out by using WILS-HF model in Aspen Plus chemical software.The yield of C7F14O simulated by the software reaches 46.13% when the number of theoretical plates is 50,and the reflux ratio is 3 for removing impurities operation and 10 for collecting C7F14O products.The yield of C7F14O obtained in the experiment is 44.46%,consistent with the simulation result,providing reference for industrial amplification.
Key words:  heptafluoro-isobutyronitrile    bis-(perfluoroisopropyl)-ketone    batch distillation    Aspen Plus    simulation
收稿日期:  2019-04-10      修回日期:  2019-11-04           出版日期:  2020-01-20
TQ028  
基金资助: 国家重点研发计划(2017YFB0902500)
通讯作者:  罗运柏(1956-),男,教授,博士生导师,研究方向为绝缘与润滑材料化学和化工分离与环境化工,通讯联系人,ybai@whu.edu.cn。    E-mail:  ybai@whu.edu.cn
作者简介:  王世尧(1995-),男,硕士生
引用本文:    
王世尧, 王敏, 高占阳, 于萍, 罗运柏. 双-(全氟异丙基)-酮间歇精馏过程的模拟与应用[J]. 现代化工, 2020, 40(1): 194-197.
WANG Shi-yao, WANG Min, GAO Zhan-yang, YU Ping, LUO Yun-bai. Simulation and application of batch distillation process for bis-(perfluoroisopropyl)-ketone. Modern Chemical Industry, 2020, 40(1): 194-197.
链接本文:  
https://www.xdhg.com.cn/CN/10.16606/j.cnki.issn0253-4320.2020.01.041  或          https://www.xdhg.com.cn/CN/Y2020/V40/I1/194
[1] 周文俊,郑宇,高克利,等.环保型绝缘气体电气特性研究进展[J].高电压技术,2018,44(10):3114-3124.
[2] Kieffel Yannick,Irwin Todd,Ponchon Philippe,et al.Green gas to replace SF6 in electrical grids[J].IEEE Power & Energy Magazine,2016,14(2):32-39.
[3] 张云飞.六氟化硫(SF6)断路器的应用及六氟化硫环保问题[J].化工科技市场,2009,32(2):35-38.
[4] 颜湘莲,高克利,郑宇,等.SF6混合气体及替代气体研究进展[J].电网技术,2018,42(6):1837-1844.
[5] Nechmi H E,Beroual A,Girodet A,et al.Fluoronitriles/CO2 gas mixture as promising substitute to SF6 for insulation in high voltage applications[J].IEEE Transactions on Dielectrics and Electrical Insulation,2016,23(5):2587-2593.
[6] 李鹏,颜湘莲,王浩,等.特高压交流GIL输电技术研究及应用[J].电网技术,2017,41(10):3161-3167.
[7] Gao Z Y,Wang M,Wang S Y,et al.Novel and efficient synthesis of insulating gas-heptafluoroisobutyronitrile from hexafluoropropylene[J].Royal Society Open Science,2019,6(3):1-8.
[8] Wang Y,Sun M T,Gao Z Y,et al.A novel and efficient synthetic route to perfluoroisobutyronitrile from perfluoroisobutyryl acid[J].RSC Advances,2018,8:37159-37164.
[9] 王晓红,谢力,张远鹏,等.带有中间储罐的间歇精馏的动态模拟与控制[J].青岛科技大学学报,2018,39(2):37-43.
[10] 秦飞飞,熊杰明,孙培志,等.粗酚的间歇精馏分离模拟[J].现代化工,2017,37(9):184-187.
[11] 崔阳.基于Aspen的间歇精馏分离乙酸乙烯酯溶液模拟研究[J].能源化工,2018,39(3):31-35.
[12] 白鹏,张健,姜志,等.间歇精馏新型操作方式的研究进展[J].化学工业与工程,2000,17(4):226-231.
[13] 包宗宏,武文良.化工计算与软件应用[M].2版.北京:化学工业出版社,2018.
[14] 王传昌,许保云,艾波,等.基于UD-Aspen的间歇精馏过程优化设计研究[J].现代化工,2016,36(9):175-177.
[15] Noda M,Kato A,Chida T,et al.Optimal structure and on-line optimal operation of batch distillation column[J].Computers and Chemical Engineering,2001,25,109-117.
[16] 艾波,王传昌,许保云,等.间歇精馏Aspen模拟过程初始化条件优化的研究[J].现代化工,2017,37(12):190-192.
[17] 许前会,吴正策,张桂花.恒回流比与多组分间歇精馏计算[J].计算机与应用化学,2008,25(6):746-748.
[18] 田文广,李雁,陶红秀,等.新戊二醇间歇精馏过程的模拟、优化与应用[J].计算机与应用化学,2012,29(11):1355-1358.
[19] 姚阳照.浅谈精馏塔的节能设计[J].化工设计,1999,9(6):15-17.
[1] 肖红岩, 张宁, 郭明钢. 膜法协同氢气分离-脱水改进STAR工艺[J]. 现代化工, 2020, 40(2): 201-205.
[2] 夏鑫, 李妍, 蔺建民. 分子模拟技术在柴油抗磨剂相关研究中的应用[J]. 现代化工, 2019, 39(S1): 38-44.
[3] 杨霞, 张瑞金, 周广文, 孙宁. 熔融酯交换法聚碳酸酯聚合过程的组合建模[J]. 现代化工, 2019, 39(S1): 173-176.
[4] 李义, 李明鑫, 刘俊, 李伟达, 贾中文, 王少靖, 赵国兴, 刘琳琳, 刘海军, 都健, 佟毅, 修志龙, 李大勇. 玉米淀粉工业中多效蒸发工艺的模拟分析与优化[J]. 现代化工, 2019, 39(S1): 187-191.
[5] 沈琛. 多晶硅尾气吸附塔再生气回收工艺的节能优化及流程模拟[J]. 现代化工, 2019, 39(S1): 192-194.
[6] 龚德状, 关桦楠, 韩博林, 宋岩, 刘晓飞, 张娜. 磁性石墨烯复合纳米粒子的制备及其检测过氧化氢的应用研究[J]. 现代化工, 2019, 39(9): 77-81.
[7] 李思宽, 刘汝佳, 张倩倩, 王二强. 基于隔板塔内在特性的快速设计策略[J]. 现代化工, 2019, 39(9): 199-203.
[8] 肖铭, 李燕, 管凤宝, 张述伟. 液氮洗联产LNG工艺模拟与改良[J]. 现代化工, 2019, 39(8): 216-220.
[9] 梁平, 宋冬寒, 文明, 陈艺为, 胡连兴, 付显朝, 李梦莹, 陈晓宇. 基于ProMax的高含硫天然气脱硫装置模拟与优化[J]. 现代化工, 2019, 39(7): 202-206,208.
[10] 邓益平, 张雷. 碳酸氢钠喷雾干燥过程的仿真研究[J]. 现代化工, 2019, 39(6): 210-214.
[11] 李朋广, 刘欣然, 高瑞昶. 萃取精馏分离乙酸乙酯和丁酮的研究[J]. 现代化工, 2019, 39(6): 219-223.
[12] 陈政利, 韩娜, 苏炜, 丁洪生, 沈健. Co-β-SBA-15催化氧化脱硫性能研究[J]. 现代化工, 2019, 39(5): 177-181.
[13] 刘庆旺, 郭昊, 范振忠, 钱黎庆, 尉小明, 刘致远. 疏水缔合减阻剂的分子模拟[J]. 现代化工, 2019, 39(5): 220-223,225.
[14] 王桂英, 刘艳杰, 陈丽. 萃取精馏分离异丙醚-异丙醇-正丙醇三元物系模拟与优化[J]. 现代化工, 2019, 39(5): 233-236.
[15] 李妍, 张舸, 蒋贞. 锐钛矿型TiO2吸附甲醛影响因素的模拟与实验研究[J]. 现代化工, 2019, 39(4): 207-210.
[1] . [J]. Modern Chemical Industry, 2015, 35(11): 77 -80 .
[2] . [J]. Modern Chemical Industry, 2015, 35(12): 128 -130,132 .
[3] . [J]. Modern Chemical Industry, 2017, 37(6): 103 -0106,108 .
[4] . [J]. , 2009, 29(6): 0 .
[5] . [J]. , 2010, 30(3): 0 .
[6] . [J]. , 2010, 30(7): 0 .
[7] . [J]. , 2007, 27(2): 0 .
[8] . [J]. Modern Chemical Industry, 2014, 34(2): 131 -133 .
[9] . [J]. Modern Chemical Industry, 2014, 34(4): 14 -16 .
[10] . [J]. Modern Chemical Industry, 2014, 34(7): 140 -144 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-37
版权所有 © 《现代化工》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn