Please wait a minute...
 
最新公告: 重要提醒:骗子冒充编辑部要求加作者微信,谨防上当!   关于暑假、寒假期间版面费发票及期刊样刊延迟邮寄的通知    
现代化工  2019, Vol. 39 Issue (4): 85-88    DOI: 10.16606/j.cnki.issn0253-4320.2019.04.019
  科研与开发 本期目录 | 过刊浏览 | 高级检索 |
不同石墨填料对相变材料性能的影响
高丽媛, 杨宾, 郝梦琳, 刘杰梅
河北工业大学能源与环境工程学院, 天津 300401
Effect of different graphite fillers on properties of phase change materials
GAO Li-yuan, YANG Bin, HAO Meng-lin, LIU Jie-mei
School of Energy and Environment Engineering, Hebei University of Technology, Tianjin 300401, China
下载:  PDF (2670KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 以石蜡为相变材料基液,分别添加不同体积分数的纳米石墨烯和纳米石墨烯片,通过两步法制备纳米颗粒复合相变材料,并进行了热性能参数测试和对比。搭建试验台测试复合相变材料的蓄放热过程并记录温度随时间变化曲线。结果表明,复合相变材料的相变潜热随着2种纳米颗粒的添加量增大而减小;对于导热为主导的凝固过程,复合相变材料的凝固速率相对于纯石蜡有提升作用,添加体积分数为1%的纳米石墨烯和纳米石墨烯片分别可提升8.7%和6.3%;对于融化过程,导热和对流共同作用决定融化速率是否被强化。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
高丽媛
杨宾
郝梦琳
刘杰梅
关键词:  相变材料  纳米石墨烯  纳米石墨烯片  潜热  凝固速率    
Abstract: A kind of nanoparticle composite phase change materials (PCMs) is prepared via a two-step process using paraffin as the matrix that is added with different volume fractions of nanographene and nanographene slice respectively,and its thermal performance parameters are characterized and tested.An experimental bench is built to test the heat storing and releasing process of the composite PCMs,and record the temperature versus time curve.The results show that the latent heat of the composite PCMs decreases as the addition amount of both two kinds of nanoparticles increases.As for the heat conduction-dominated solidification process,the solidification rate of the composite PCMs are higher than that of pure paraffin and the addition of the nanographene and nanographene slice both with a volume fraction of 1% can increase the solidification rate by 8.7% and 6.3%,respectively.As for the melting process,heat conduction and converting together determine whether the melting rate of the composite PCMs is enhanced or not.
Key words:  phase change materials    nanographene    nanographene slice    latent heat    solidification rate
收稿日期:  2018-07-28      修回日期:  2019-01-29          
ZTFLH:  TK02  
基金资助: 国家重点研发计划(2016YFC0700707);河北省高等学校科学技术研究项目(QN2015028);河北省科技计划项目(15214315);河北省建设科技研究计划(201522JS);天津市教委科研计划项目(20140418)
通讯作者:  杨宾(1980-),男,博士,副教授,研究方向为建筑节能与可再生能源,通讯联系人,Yangbin0720@hebut.edu.cn。    E-mail:  Yangbin0720@hebut.edu.cn
作者简介:  高丽媛(1993-),女,硕士研究生,研究方向为可再生能源与储能材料,gaoly_heb@163.com
引用本文:    
高丽媛, 杨宾, 郝梦琳, 刘杰梅. 不同石墨填料对相变材料性能的影响[J]. 现代化工, 2019, 39(4): 85-88.
GAO Li-yuan, YANG Bin, HAO Meng-lin, LIU Jie-mei. Effect of different graphite fillers on properties of phase change materials. Modern Chemical Industry, 2019, 39(4): 85-88.
链接本文:  
http://www.xdhg.com.cn/CN/10.16606/j.cnki.issn0253-4320.2019.04.019  或          http://www.xdhg.com.cn/CN/Y2019/V39/I4/85
[1] 王继芬,谢华清,辛忠,等.纳米ZnO/石蜡复合相变材料的热物理性质研究[J].工程热物理学报,2011,32(11):1897-1899.
[2] Wu S Y,Wang H,Xiao S,et al.An investigation of melting/freezing characteristics of nanoparticle-enhanced phase change materials[J].Journal of Thermal Analysis & Calorimetry,2012,110(3):1127-1131.
[3] Teng T P,Yu C C.Characteristics of phase-change materials containing oxide nano-additives for thermal storage[J].Nanoscale Research Letters,2012,7(1):611.
[4] 李新芳,吴淑英,朱冬生.碳纳米管/石蜡复合相变储能材料的导热性能研究[J].现代化工,2015,35(5):113-116.
[5] Teng T P,Cheng C M,Cheng C P.Performance assessment of heat storage by phase change materials containing MWCNTs and graphite[J].Applied Thermal Engineering,2013,50(1):637-644.
[6] 王元明,丁云飞,吴会军.石蜡/碳纳米管复合相变材料的性能研究[J].现代化工,2015,35(1):130-134.
[7] 吴淑英,童旋,龚曙光,等.纳米石墨烯片/石蜡复合相变蓄热材料的热性质研究[J].化工新型材料,2014,(7):105-107.
[8] Sari A,Karaipekli A.Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material[J].Applied Thermal Engineering,2007,27(8):1271-1277.
[1] 张向倩. 相变储能材料的研究进展与应用[J]. 现代化工, 2019, 39(4): 67-70.
[2] 辛成, 陆少锋, 申天伟, 肖超鹏, 张永生. 聚氨酯微胶囊相变材料的制备及性能[J]. 现代化工, 2019, 39(3): 100-102,104.
[3] 申天伟, 陆少锋, 邢建伟, 宋庆文, 辛成. 新型网状结构囊壁微胶囊化相变材料的制备[J]. 现代化工, 2019, 39(1): 110-113,115.
[4] 辛成, 陆少锋, 申天伟, 张永生, 肖超鹏. 聚氨酯网状相变微胶囊的制备及在棉织物上的应用[J]. 现代化工, 2018, 38(8): 126-129,131.
[5] 赵跃珍, 韦慧鹏, 张宇昂, 张淑芬, 唐炳涛. PEG/SiO2-Ni复合定形相变材料的制备与性能研究[J]. 现代化工, 2018, 38(11): 121-126.
[6] 张鑫, 王一平, 黄群武, 崔勇. 潜热储存技术研究进展及应用[J]. 现代化工, 2017, 37(9): 66-69.
[7] 夏永鹏, 崔韦唯, 张焕芝, 徐芬, 邹勇进, 向翠丽, 褚海亮, 邱树君, 孙立贤. 复合相变储能材料的制备及强化传热研究进展[J]. 现代化工, 2017, 37(6): 15-19,21.
[8] 魏堃, 马骉, 汪海年, 刘玉. 化学法合成高分子固-固相变材料的研究进展[J]. 现代化工, 2016, 36(6): 55-59.
[9] 李琳, 琚诚兰, 李东旭. 定形相变材料及其石膏基储能建筑材料的研究[J]. 现代化工, 2016, 36(2): 106-108,110.
[10] 尚建丽, 程鹏. 多孔纤维相变调湿材料的制备与性能研究[J]. 现代化工, 2015, 35(5): 69-72.
[11] 王元明, 丁云飞, 吴会军. 石蜡/碳纳米管复合相变材料的性能研究[J]. 现代化工, 2015, 35(1): 130-134.
[12] 魏堃, 马骉. 化学法制备相变材料微胶囊的研究进展[J]. 现代化工, 2014, 34(10): 72-75,77.
[13] 包艳华,王庭慰. 脂肪酸低熔混合物的制备及强化传热研究[J]. , 2011, 31(3): 0-0.
[14] 王毅,郑翰,冯辉霞,夏天东. 硬脂酸/活化凹凸棒石复合相变储热材料的制备与表征[J]. , 2011, 31(2): 0-0.
[15] 包艳华,王庭慰. 脂肪酸相变材料的研究进展及应用[J]. , 2010, 30(2): 0-0.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-37
版权所有 © 《现代化工》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn