Please wait a minute...
 
最新公告: 重要提醒:骗子冒充编辑部要求加作者微信,谨防上当!   关于暑假、寒假期间版面费发票及期刊样刊延迟邮寄的通知    
现代化工  2018, Vol. 38 Issue (6): 73-77    DOI: 10.16606/j.cnki.issn0253-4320.2018.06.017
  科研与开发 本期目录 | 过刊浏览 | 高级检索 |
Ce-Mn/ZSM-5催化剂的制备及其低温脱硝性能分析
任爱玲, 刘卉, 张硕, 赵文霞
河北科技大学环境科学与工程学院, 挥发性有机物与恶臭污染防治技术 国家地方联合工程研究中心, 河北 石家庄 050018
Preparation of Ce-Mn/ZSM-5 catalyst and its denitration performance at low temperature
REN Ai-ling, LIU Hui, ZHANG Shuo, ZHAO Wen-xia
School of Environmental Science and Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China
下载:  PDF (4663KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 采用浸渍法制备了不同Ce与Mn质量比的Ce-Mn/ZSM-5催化剂,并研究其理化特性和NH3-SCR反应的低温脱硝性能。借助X射线衍射、扫描电镜、N2吸附/脱附、X射线光电子能谱和电感耦合等离子体光谱等手段对催化剂表征分析表明,活性组分分散良好,且主要分布在催化剂表面,其中Mn以其多种氧化物形态存在,Ce多以Ce3+的形式存在。脱硝性能测试表明,Ce的质量分数影响催化剂脱硝性能,当Ce与Mn质量比为0.4时,Ce-Mn/ZSM-5催化活性最佳,在100~300℃之内,脱硝效率一直保持在90%以上。适量Ce的引入增加了催化剂表面吸附氧含量,促使低温下反应加速进行。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
任爱玲
刘卉
张硕
赵文霞
关键词:  选择性催化还原  氮氧化物  Ce-Mn/ZSM-5  脱硝    
Abstract: Ce-Mn/ZSM-5 catalysts with different mass ratios of Ce to Mn are prepared by impregnation method,and the influence of mass ratio of Ce to Mn on physiochemical properties of these catalysts and their denitration performance at low temperature for NH3-SCR reaction are investigated.The prepared catalysts are characterized by XRD,SEM,BET,XPS and ICP techniques.It shows that the active components disperse well and mainly on the surface of catalysts.Among them,Mn exists in a variety of oxides forms and Ce mostly exists in the form of Ce3+.The experimental results show that the mass content of Ce affects the denitration performance of catalyst.Ce-Mn/ZSM-5 with mass ratio between Ce and Mn being 0.4 has the best catalytic activity,and its denitration efficiency will keep above 90% when the reaction temperature is between 100℃ and 300℃.The appropriate addition of Ce can increase content of adsorbed oxygen on the surface of catalyst,which stimulates the catalytic reduction reaction to accelerate at low temperature.
Key words:  selective catalytic reduction    nitrogen oxide    Ce-Mn/ZSM-5    denitration
收稿日期:  2017-10-30      修回日期:  2018-04-12           出版日期:  2018-06-20
X511  
基金资助: 国家科技支撑计划项目(2014BAC23B04-03);河北省科技计划项目(16273708D);河北省自然基金(E2016208144)
通讯作者:  刘卉(1991-),女,研究生,研究方向为大气污染控制,通讯联系人,18233136535@163.com。    E-mail:  18233136535@163.com
作者简介:  任爱玲(1963-),女,博士,教授,研究方向为大气污染控制,ailingr@163.com
引用本文:    
任爱玲, 刘卉, 张硕, 赵文霞. Ce-Mn/ZSM-5催化剂的制备及其低温脱硝性能分析[J]. 现代化工, 2018, 38(6): 73-77.
REN Ai-ling, LIU Hui, ZHANG Shuo, ZHAO Wen-xia. Preparation of Ce-Mn/ZSM-5 catalyst and its denitration performance at low temperature. Modern Chemical Industry, 2018, 38(6): 73-77.
链接本文:  
http://www.xdhg.com.cn/CN/10.16606/j.cnki.issn0253-4320.2018.06.017  或          http://www.xdhg.com.cn/CN/Y2018/V38/I6/73
[1] France L J,Yang Q,Li W,et al.Ceria modified FeMnO</i>x-Enhanced performance and sulphurresistance for low-temperature SCR of NO</i>x[J].Applied Catalysis B:Environmental,2017,206:203-215.
[2] 张亚通,张明路,王东立,等.SCR法烟气脱硝催化剂的制备实验研究[J].河北科技大学学报,2013,34(3):241-246.
[3] 刘颖.氮氧化物对环境的危害及污染控制技术[J].赤子,2013,(7):237-237.
[4] 赵桂锋,杨文波.SCR脱硝技术概述[J].锅炉制造,2007,(2):41-42.
[5] Park E,Chin S,Kim J,et al.Preparation of MnO</i>x/TiO2 ultrafine nanocomposite with large surface area and its enhanced toluene oxidation at low temperature[J].Powder Technology,2011,208(3):740-743.
[6] 李哲,汪莉,贠丽,等.Cr-MnO</i>x/TiO2-ZrO2低温选择催化还原NO的活性及抗毒性能[J].工程科学学报,2015,37(8):1049-1056.
[7] 刘亭,王廷春,吴瑞青,等.低温NH3-SCR脱硝催化剂研究进展[J].安全与环境学报,2012,19(6):42-44.
[8] Boningari Thirupathi,Panagiotis G.Smirniotis.Nickel-doped Mn/TiO2 as an efficient catalyst for the low-temperature SCR of NO with NH3:Catalytic evaluation and characterizations[J].Journal of Catalysis,2012,288:74-83.
[9] Gao C,Shi J W,Fan Z Y,et al.Eu-Mn-Ti mixed oxides for the SCR of NO with NH3:The effects of Eu-modification on catalytic performance and mechanism[J].Fuel Processing Technology,2017,167:322-333.
[10] Zhao B H,Ran R,Guo X G,et al.Nb-modified Mn/Ce/Ti catalyst for the selective catalytic reduction of NO with NH3 at low temperature[J].Applied Catalysis A:General,2017,545:64-71.
[11] Zhu Y W,Zhang Y P,Xiao R,et al.Novel holmium-modified Fe-Mn/TiO2 catalysts with a broad temperature window and high sulfur dioxide tolerance for low-temperature SCR[J].Catalysis Communications,2017,88:64-67.
[12] Carja G,Kameshima Y,Okada K,et al.Mn-Ce/ZSM5 as a new superior catalyst for NO reduction with NH3[J].Applied Catalysis B Environmental,2007,73(1):60-64.
[13] Lv G,Feng B,Song C L,et al.Promoting effect of zirconium doping on Mn/ZSM-5 for the selective catalytic reduction of NO with NH3[J].Fuel,2013,107(9):217-224.
[14] 唐富顺,赵辉,刘津,等.担载型Co/ZSM-5催化剂表面Co组分结构与柴油车NO</i>x净化性能[J].分子催化,2015,(3):256-265.
[15] 吕刚,吴虎,宋崇林,等.Mn/ZSM-5催化剂及其SCR催化性能研究[J].工程热物理学报,2011,32(9):1597-1600.
[16] Zhang L,Shi L,Huang L,et al.Rational design of high-performance DeNO</i>x catalysts based on Mn</i>xCo3-xO4 nanocages derived from metal-organic frameworks[J].Acs Catalysis,2014,4(6):1753-1763.
[17] Gao G,Shi J W,Liu C,et al.Mn/CeO2 catalysts for SCR of NO</i>x with NH3:Comparative study on the effect of supports on low-temperature catalytic activity[J].Applied Surface Science,2017,411:338-346.
[18] 刘建东,黄张根,李哲,等.Ce对Mn/TiO2/堇青石整体低温脱硝选择性催化还原催化剂的改性[J].高等学校化学学报,2014,35(3):589-595.
[19] Fang C,Zhang D,Cai S,et al.Low-temperature selective catalytic reduction of NO with NH3 over nanoflaky MnO</i>x on carbon nanotubes in situ prepared via a chemical bath deposition route[J].Nanoscale,2013,5(19):9199.
[20] Shen B,Wang F,Liu T,et al.Homogeneous MnO</i>x-CeO2,pellets prepared by a one-step hydrolysis process for low-temperature NH3-SCR[J].Powder Technology,2014,253(2):152-157.
[21] Xiong Y,Tang C,Yao X,et al.Effect of metal ions doping (M=Ti4+,Sn4+) on the catalytic performance of MnO</i>x/CeO2,catalyst for low temperature selective catalytic reduction of NO with NH3[J].Applied Catalysis A General,2015,495(1):206-216.
[1] 张耀日, 霍志萍, 张丽娟, 冯晴, 臧甲忠, 于海斌. SSZ-13分子筛合成及应用进展[J]. 现代化工, 2018, 38(9): 54-59.
[2] 杨松. 氨逃逸测量技术在脱硝系统中的应用研究与优化[J]. 现代化工, 2018, 38(6): 216-219.
[3] 杨旭, 陈红萍, 齐雪. 脱硝催化剂的硫中毒机理研究[J]. 现代化工, 2018, 38(2): 20-24.
[4] 吴涛, 刘显彬, 席文昌. 从废弃脱硝催化剂进行钛分离中酸解率影响因素研究[J]. 现代化工, 2018, 38(1): 115-117.
[5] 韩香莲, 陈学玺. 气液双相强化的湿式氧化锰循环烟气脱硝研究[J]. 现代化工, 2018, 38(1): 165-168,170.
[6] 张元春, 高圣涛. 氨法选择性催化还原工艺在硝酸尾气治理中的应用[J]. 现代化工, 2018, 38(1): 177-179.
[7] 申敏, 牛峰. 基于专利数据分析我国脱硝催化剂产业技术发展状况[J]. 现代化工, 2017, 37(9): 12-16.
[8] 赵小鸽, 刘梦梦, 王建成, 胡江亮, 韩丽娜. Cu-SSZ-13分子筛NH3-SCR脱硝技术研究[J]. 现代化工, 2017, 37(9): 34-39.
[9] 周惠, 黄华存, 董文华, 崔晶. V2O5-WO3/TiO2脱硝催化剂的制备及抗硫性能[J]. 现代化工, 2017, 37(9): 114-118.
[10] 孙涛略, 程刘备, 王建英, 胡永琪. O3气相氧化-液相吸收法脱除烟道气中NO的中试实验研究[J]. 现代化工, 2017, 37(9): 175-178.
[11] 何发泉, 王宝冬, 马少丹, 马子然, 马静, 刘子林, 林德海, 孙琦, 徐文强. 生物质电厂SCR脱硝催化剂失效及再生研究[J]. 现代化工, 2017, 37(8): 72-76.
[12] 陈玉龙, 赵宇鸿, 戴子剑, 吴涛, 金海波, 杨基和. 不锈钢酸洗混酸再生烟气SCR脱硝工艺设计[J]. 现代化工, 2017, 37(8): 166-169.
[13] 茹晋波, 熊源泉, 吴波, 冯浩. 不同载体铁基催化剂异相芬顿反应脱硝实验研究[J]. 现代化工, 2017, 37(7): 78-81,83.
[14] 路平, 王玉爽, 黄志伟, 仇汝臣. 臭氧法脱硫脱硝工艺设计[J]. 现代化工, 2017, 37(4): 171-174.
[15] 李如冰, 吴玉锋, 章启军, 陈希, 刘彬. 关于商用SCR(V2O5-WO3/TiO2)催化剂的再生和回收研究概述[J]. 现代化工, 2017, 37(3): 29-33.
[1] . [J]. Modern Chemical Industry, 2015, 35(11): 77 -80 .
[2] . [J]. Modern Chemical Industry, 2015, 35(12): 128 -130,132 .
[3] . [J]. Modern Chemical Industry, 2017, 37(6): 103 -0106,108 .
[4] . [J]. , 2003, 23(5): 0 .
[5] . [J]. , 2009, 29(6): 0 .
[6] . [J]. , 2010, 30(3): 0 .
[7] . [J]. , 2010, 30(7): 0 .
[8] . [J]. , 2007, 27(2): 0 .
[9] . [J]. Modern Chemical Industry, 2014, 34(2): 131 -133 .
[10] . [J]. Modern Chemical Industry, 2014, 34(4): 14 -16 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-37
版权所有 © 《现代化工》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn