PDF (1860K)
摘要
采用共混热解法制备了不同Sn质量分数的V-Mo-Sn/Ti催化剂,通过XRD、N2-吸附脱附和H2-TPR等手段对催化剂进行表征,并在模拟选择性催化还原(SCR)烟气固定床中考察了不同催化剂的脱硝性能及单质汞(Hg0)氧化性能。结果表明,Sn的引入降低了V-Mo/Ti催化剂的比表面积和孔容,但没有改变其晶型。相比V-Mo/Ti催化剂,V-Mo-Sn/Ti催化剂具有较高的还原性能、酸性能、脱硝活性、汞氧化效率以及较多的化学吸附氧含量。此外,HCl具有促进Hg0氧化的作用,含Sn催化剂提升了低HCl状态下的Hg0氧化性能。
Abstract
V-Mo-Sn/Ti catalysts with different contents of Sn are prepared through blending thermal decomposition method. XRD, N2-adsorption and H2-TPR are employed to characterize the catalysts. The performances of the catalysts in denitrification and oxidation activity of elemental mercury (Hg0) are investigated in a simulated selective catalytic reduction (SCR) flue gas fixed bed. Results show that the addition of tin causes V-Mo/Ti catalysts to have lower BET surface area and pore volume, but has little impact on their crystal structure. Compared with V-Mo/Ti catalyst, V-Mo-Sn/Ti catalysts present higher reducibility, acidity, denitrification activity and mercury oxidation efficiency, and more amount of chemical adsorbed oxygen. In addition, HCl can promote the oxidation of mercury, and Sn-containing catalyst can improve the oxidation performance to mercury in low HCl state.
关键词
脱硝催化剂
/
Hg0氧化
/
V-Mo/Ti
/
Sn
Key words
denitrification catalyst
/
Hg0 oxidation
/
V-Mo/Ti
/
tin
Author summay
纵宇浩(1987-),男,硕士,工程师,研究方向为脱硝催化剂新产品的开发及应用,zongyh@dteg.com.cn
Sn的添加对V-Mo/Ti催化剂脱硝及汞氧化性能的影响[J].
现代化工, 2021, 41(8): 159-164 DOI:10.16606/j.cnki.issn0253-4320.2021.08.032