PDF (3473K)
摘要
在不同模板剂条件下,采用水热法和共沉淀法制备了纤维状、片状、棉花状和页岩状CeO2/Cu0.2Co0.8Oδ催化剂,并对催化剂的结构和活性评价数据进行表征与分析。结果表明,共沉淀法制备的页岩状CeO2/Cu0.2Co0.8Oδ催化剂催化CO的氧化性能最好,CO转化率达到100%时的温度最低(75℃)。在常温、3 MPa条件下可将液相丙烯中CO体积分数脱除至2×10-8。页岩状CeO2/Cu0.2Co0.8Oδ催化剂催化活性好的主要原因是其低温还原性能好、催化剂上CeO2高度分散、CeO2与载体之间有较强的相互作用。
Abstract
Fiber-like,flake-like,cotton-like and shale-like CeO2/Cu0.2Co0.8Oδ catalysts are prepared via hydrothermal and co-precipitation methods under different templating conditions.It is verified that shale-like CeO2/Cu0.2Co0.8Oδ prepared by co-precipitation method has the best catalytic performance for CO oxidation,over which the temperature required to achieve 100% CO conversion is 75℃,being the lowest among the four kinds of catalysts.Over such shale-like catalyst,the volume fraction of CO in liquid propylene can be removed to 2×10-8 at room temperature and 3 MPa.Based on the characterization results and activity data,it is concluded that the main reasons for the best catalytic activity of shale-like CeO2/Cu0.2Co0.8Oδ are contributed to its best low-temperature reducibility,highly dispersed CeO2 nanoparticles,and the strong interaction between CeO2 nanoparticles and the support.
关键词
载体形貌
/
液相丙烯
/
CO催化氧化
Key words
support morphology
/
liquid propylene
/
catalytic oxidation of CO
Author summay
李磊(1982-),男,博士,高级工程师,研究方向为高分子材料研究,15054269@chnenergy.com.cn
载体形貌对CeO2/Cu0.2Co0.8Oδ催化剂催化CO氧化性能的影响[J].
现代化工, 2020, 40(7): 150-154 DOI:10.16606/j.cnki.issn0253-4320.2020.07.032