己二酸二甲酯加氢催化剂的放大制备及加氢工艺研究

方鑫, 杨幸川, 刘国际, 徐丽

现代化工 ›› 2018, Vol. 38 ›› Issue (12) : 197 -199.

PDF (1513KB)
现代化工 ›› 2018, Vol. 38 ›› Issue (12) : 197-199. DOI: 10.16606/j.cnki.issn0253-4320.2018.12.045
工艺与设备

己二酸二甲酯加氢催化剂的放大制备及加氢工艺研究

    方鑫, 杨幸川, 刘国际, 徐丽
作者信息 +

Scale-up production of CuO-ZnO-Al2O3 catalyst for catalytic hydrogenation of dimethyl adipate and study on hydrogenation process

Author information +
文章历史 +
PDF (1548K)

摘要

用50 L的多功能间歇反应釜进行了催化剂的放大制备,在固定床反应器上对己二酸二甲酯加氢制备1,6-己二醇工艺条件进行了研究,考察了反应温度、压力、气体空速、氢酯摩尔比对反应的影响。在反应温度为230~250℃、反应压力为5.0~8.1 MPa、气体空速为6 151~12 300 h-1、氢酯摩尔比大于150、液时空速为0.3~0.6 h-1等操作条件下,己二酸二甲酯转化率达到99%以上,1,6-己二醇的收率在97%以上。

Abstract

A catalyst for production of 1,6-hexanediol is prepared via co precipitation technology in a 50 L scale-up batch reactor.The performance of the catalyst is appraised through catalytic hydrogenation of dimethyl adipate in a high temperature and high pressure fixed bed reactor.Influences of reaction temperature,pressure,gas hourly space velocity and molar ratio between hydrogen and ester on the hydrogenation reaction are investigated.The results show that the conversion rate of dimethyl adipate can exceed 99% and the yield of 1,6-hexanediol can reach above 97% when the reaction temperature is at 230-250℃,the pressure is 5-8 MPa,the gas hourly space velocity is 6 151-12 300 h-1,the molar ratio between hydrogen and ester is larger than 150 and liquid hourly space velocity is 0.3-0.6 h-1.

关键词

铜基催化剂 / 1,6-己二醇 / 己二酸二甲酯 / 加氢工艺 / 放大

Key words

copper-based catalyst / 1,6-hexanediol / dimethyl adipate / hydrogenation process / scale-up

Author summay

方鑫(1991-),男,硕士生

引用本文

引用格式 ▾
己二酸二甲酯加氢催化剂的放大制备及加氢工艺研究[J]. 现代化工, 2018, 38(12): 197-199 DOI:10.16606/j.cnki.issn0253-4320.2018.12.045

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

AI Summary AI Mindmap
PDF (1513KB)

245

访问

0

被引

导航
相关文章

AI思维导图

/