Please wait a minute...
 
最新公告: 重要提醒:骗子冒充编辑部要求加作者微信,谨防上当!   关于暑假、寒假期间版面费发票及期刊样刊延迟邮寄的通知    
现代化工  2018, Vol. 38 Issue (11): 221-225    DOI: 10.16606/j.cnki.issn0253-4320.2018.11.048
  信息技术应用 本期目录 | 过刊浏览 | 高级检索 |
燃料电池供氢组合阀仿真与拓扑优化研究
焦杰, 张幽彤, 孙立清, 李涛
北京理工大学机械与车辆学院, 北京 100081
Simulation and topology optimization for hydrogen supply combination valves in fuel cell
JIAO Jie, ZHANG You-tong, SUN Li-qing, LI Tao
School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China
下载:  PDF (3984KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 针对燃料电池供氢系统管路集成和轻量化开展研究,提出了一种集成式组合阀,建立了该阀AMESim模型,仿真研究了阀设计参数与输出量之间的变化规律;以阀体轻量化为目标对阀体结构拓扑优化。结果表明,与原供氢系统相比,集成式组合阀系统体积减少了43%,具有0.3 s的快速响应能力和2×10-4 g/s的流量控制精度,拓扑优化后的组合阀质量减少了46.7%。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
焦杰
张幽彤
孙立清
李涛
关键词:  供氢系统  组合阀  AMESim仿真  拓扑优化    
Abstract: This paper studies the integration and weight reduction of hydrogen supply system in fuel cell,proposes an integrated combination valve,establishes the AMESim model for this valve and simulates the variation between design parameters of this valve and the output amount.The valve body structure is optimized in topology to reduce the weight of the valve.The results show that the integrated combination valve system has a 43% reduction in volume compared with previous hydrogen supply system and owns a fast response capacity of 0.3 s and a flow control accuracy of 2×10-4 g·s-1.Total weight of the combined valve after topology optimization drops 46.7%.
Key words:  hydrogen supply system    combination valves    AMESim simulation    topology optimization
收稿日期:  2018-07-29      修回日期:  2018-09-05          
TH138.52  
通讯作者:  焦杰(1993-),男,硕士生;张幽彤(1965-),男,教授,主要从事车用动力等方面的研究工作,通讯联系人,010-68915013,youtong@bit.edu.cn。    E-mail:  youtong@bit.edu.cn
引用本文:    
焦杰, 张幽彤, 孙立清, 李涛. 燃料电池供氢组合阀仿真与拓扑优化研究[J]. 现代化工, 2018, 38(11): 221-225.
JIAO Jie, ZHANG You-tong, SUN Li-qing, LI Tao. Simulation and topology optimization for hydrogen supply combination valves in fuel cell. Modern Chemical Industry, 2018, 38(11): 221-225.
链接本文:  
http://www.xdhg.com.cn/CN/10.16606/j.cnki.issn0253-4320.2018.11.048  或          http://www.xdhg.com.cn/CN/Y2018/V38/I11/221
[1] 付甜甜.电动汽车用氢燃料电池发展综述[J].电源技术,2017,41(4):651-653.
[2] 李星国.氢与氢能[M].北京:机械工业出版社,2012.
[3] 何雍,李亚超,吴兵,等.基于MotoTron平台的燃料电池共轨喷射系统的研发[J].汽车工程,2013,35(2):133-137.
[4] 王金龙,王登峰,陈书明.车用燃料电池效率测试及影响因素[J].广西大学学报:自然科学版,2010,35(6):989-994.
[5] 洪凌.车用燃料电池发电系统氢气回路控制[D].杭州:浙江大学,2017.
[6] 刘扬,刘汇源.高压储氢气瓶组合阀的研制[J].通用机械,2008,6(9):93-95.
[7] Yamashita A,Kondo M,Goto S,et al.Development of high-pressure hydrogen storage system for the Toyota "MIRAI"[R].SAE Tech Paper,2015.
[8] 郭志阳,周鸿波,陆建山.一种燃料电池汽车用的供氢系统:CN,106356544A[P].2017-01-25.
[9] GB/T 34872-2017.质子交换膜燃料电池供氢系统技术要求[S].
[10] 王冰,侍崇诗,黄明宇,等.燃料电池供氢系统的研究进展[J].现代化工,2018,38(1):35-39.
[11] Buchbinder D,Schleifenbaum H,Heidrich S,et al.High power selective laser melting (HP SLM) of aluminum parts[J].Physics Procedia,2011,12(1):271-278.
[12] 袁伟,李宗涛,潘敏强,等.5 kW氢-空质子交换膜燃料电池系统设计研究[J].华东电力,2008,36(8):68-71.
[13] McCloy D,Martin H.Control of fluid power:Analysis and design[M].2nd edition.Ellis Horwood Limited,1980.
[14] Blackburn J F,Reethof G,Shearer J L.Fluid power control[M].M.I.T.Press,1960.
[15] 焦洪宇,周奇才,李文军,等.基于变密度法的周期性拓扑优化[J].机械工程学报,2013,49(13):132-138.
[1] 王冰, 侍崇诗, 黄明宇, 陈国钧, 戴国平, 倪红军. 燃料电池供氢系统的研究进展[J]. 现代化工, 2018, 38(1): 35-39,41.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-37
版权所有 © 《现代化工》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn