Please wait a minute...
 
最新公告: 重要提醒:骗子冒充编辑部要求加作者微信,谨防上当!   关于暑假、寒假期间版面费发票及期刊样刊延迟邮寄的通知    
现代化工  2018, Vol. 38 Issue (9): 224-228    DOI: 10.16606/j.cnki.issn0253-4320.2018.09.051
  信息技术应用 本期目录 | 过刊浏览 | 高级检索 |
基于Aspen Plus的热等离子体气化含油污泥的模拟研究
金兆荣, 侯峰, 徐宏
华东理工大学化学工程联合国家重点实验室, 上海 200237
Aspen Plus simulation on gasification of oily sludge by thermal plasma
JIN Zhao-rong, HOU Feng, XU Hong
State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
下载:  PDF (1673KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 基于Aspen Plus平台对含油污泥气化反应进行数值模拟和研究,使用吉布斯自由能最小的原理,建立气化模型并验证模型的可靠性。模拟以含油污泥为原料,空气作为气化剂,分析了进料含水率、气化温度、当量比对热等离子体气化特性的影响,确定了气化反应最佳操作参数:含水率在14%~17%,气化温度为保证充分反应的最低温度,当量比为0.15。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
金兆荣
侯峰
徐宏
关键词:  Aspen Plus  含油污泥  热等离子体  气化    
Abstract: Based on Aspen Plus software platform, the gasification process of oily sludge is simulated and analyzed.The gasification model is established based on the Gibbs free energy minimization method and its reliability is verified.In the simulation, the oily sludge is used as raw material and air is used as the gasification gas, the influences of feed moisture content, gasification temperature and equivalence ratio on the characteristics of thermal plasma are analyzed.The optimal operation parameters for gasification process are determined as follows:the moisture content is between 14%-17%, the temperature is the lowest temperature that ensures full reaction and the equivalence ratio is around 0.15.
Key words:  Aspen Plus    oily sludge    thermal plasma    gasification
收稿日期:  2018-03-05      修回日期:  2018-07-03          
X741  
通讯作者:  徐宏(1962-),男,博士,教授,主要研究方向为能源高效利用与节能,通讯联系人,021-64253810,hxu@ecust.edu.cn    E-mail:  hxu@ecust.edu.cn
作者简介:  金兆荣(1992-),男,硕士生。
引用本文:    
金兆荣, 侯峰, 徐宏. 基于Aspen Plus的热等离子体气化含油污泥的模拟研究[J]. 现代化工, 2018, 38(9): 224-228.
JIN Zhao-rong, HOU Feng, XU Hong. Aspen Plus simulation on gasification of oily sludge by thermal plasma. Modern Chemical Industry, 2018, 38(9): 224-228.
链接本文:  
http://www.xdhg.com.cn/CN/10.16606/j.cnki.issn0253-4320.2018.09.051  或          http://www.xdhg.com.cn/CN/Y2018/V38/I9/224
[1] Mazzoni L,Janajreh I.Plasma gasification of municipal solid waste with variable content of plastic solid waste for enhanced energy recovery[J].International Journal of Hydrogen Energy,2017,30(42):19446-19457.
[2] Kunze C,Spliethoff H.Modelling,comparison and operation experiences of entrained flow gasifier[J].Energy Conversion & Management,2011,52(5):2135-2141.
[3] 刘联胜,赵荣煊,王高月,等.基于Aspen Plus的烟气气氛下生物质气化模拟[J].农业机械学报,2017,48(6):278-283.
[4] 曹小玲,陈建行,熊家佳,等.等离子体气化技术处理城市生活垃圾的研究现状[J].现代化工,2014,34(9):26-31.
[5] Gordillo G,Annamalai K,Carlin N.Adiabatic fixed-bed gasification of coal,dairy biomass,and feedlot biomass using an air-steam mixture as an oxidizing agent[J].Renewable Energy,2009,34(12):2789-2797.
[6] 刘凌沁.生物质气化试验与Aspen Plus模拟研究[D].南京:东南大学,2016.
[7] Minutillo M,Perna A,Bona D D.Modelling and performance analysis of an integrated plasma gasification combined cycle (IPGCC) power plant[J].Energy Conversion & Management,2009,50(11):2837-2842.
[8] Agon N,Hrabovsk Ay'1 M,Chumak O,et al.Plasma gasification of refuse derived fuel in a single-stage system using different gasifying agents[J].Waste Management,2016,47(B):246-255.
[9] 庞先勇.等离子体炬辅助煤气化研究[D].太原:太原理工大学,2007.
[10] Arena U.Process and technological aspects of municipal solid waste gasification.A review[J].Waste Management,2012,32(4):625-639.
[11] 蔡敏华,唐兰,赵矿美.基于Aspen Plus的等离子体气化生物质模拟分析[J].广西大学学报:自然科学版,2016,41(3):863-869.
[12] 周劲松,王铁柱,骆仲泱,等.生物质焦油的催化裂解研究[J].燃料化学学报,2003,31(2):144-148.
[1] 刘艳杰, 王犇, 潘高峰. 乙酸异丙酯回收工艺模拟与优化[J]. 现代化工, 2018, 38(9): 215-218.
[2] 谢江浩, 马蒸钊, 郭兵, 谷广锋, 杨庭, 肖成磊. 油气田含油固废热解技术应用现状[J]. 现代化工, 2018, 38(9): 36-39.
[3] 郝五兴, 张静, 薛飞, 张永发. 褐煤半焦热解温度对其加氢制甲烷活性的影响[J]. 现代化工, 2018, 38(9): 85-89.
[4] 纪钦洪, 于广欣, 于航, 熊亮, 孙玉平, 刘强. 包埋菌膨胀床脱氮工艺处理煤气化废水[J]. 现代化工, 2018, 38(8): 176-179.
[5] 何英华, 朱丽娜, 刘龙, 孙维, 张德顺. 溶剂脱沥青改质技术处理加拿大油砂沥青模拟研究[J]. 现代化工, 2018, 38(8): 227-230.
[6] 俞海淼, 刘阳, 武子璐. 生物质三组分催化气化后焦油析出特性研究[J]. 现代化工, 2018, 38(8): 90-93.
[7] 周鹏, 郎中敏. GE水煤浆加压气化中粗煤气洗涤工艺的优化和设计[J]. 现代化工, 2018, 38(7): 194-198.
[8] 田伟, 阎富生, 黄永红, 李亚晴, 杜圣飞, 梁丕荣. 碱土金属对石油焦直接制氢的模拟分析[J]. 现代化工, 2018, 38(7): 208-213.
[9] 韩淑萃, 杨金杯. 丙酸甲酯和甲醇共沸物萃取精馏分离工艺的研究[J]. 现代化工, 2018, 38(7): 214-218.
[10] 李静, 王克良, 连明磊, 李志, 吴红, 李琳, 叶昆. [DMIM]MS萃取精馏制取无水乙醇的过程模拟[J]. 现代化工, 2018, 38(7): 223-226.
[11] 黄志伟, 朱萌, 张之杰, 仇汝臣. 绝热多段甲烷化工艺研究[J]. 现代化工, 2018, 38(6): 182-185.
[12] 江健荣, 冯霄, 段明哲, 张志刚. 深冷空分装置不同产品纯度下的产品能耗[J]. 现代化工, 2018, 38(6): 198-201.
[13] 马春蕾, 翟丽军. 正交设计优化分壁式萃取精馏分离乙酸异丙酯-异丙醇的模拟研究[J]. 现代化工, 2018, 38(6): 202-205.
[14] 金兆荣, 徐宏, 侯峰, 吴增发. 热等离子体技术处理危险废物的应用探讨[J]. 现代化工, 2018, 38(5): 6-10.
[15] 柳康, 刘沅, 樊强, 陈雄, 任永强, 许世森. 燃烧前CO2捕集MDEA系统模拟及优化[J]. 现代化工, 2018, 38(5): 201-204.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备09035943号-37
版权所有 © 《现代化工》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn